Logo Header  Footer
Logo Header  Footer
Authorized Distributor of BLICKLE In Indonesia

Some of the products that have been installed are listed below

Have a look at some of the Products which we have made happen for our customers. Customer-specific solutions and products from our standard range provide solutions for specific applications in a variety of industries.
Many large companies use tuggers indoors and outdoors for internal transport. A tugger is an industrial truck made up of a tractor unit and a number of load carriers. Many different designs are available. They are used to increase productivity and reduce the amount of internal traffic while facilitating standardised intralogistics processes.

The castors used must be in constant contact with the floor to prevent the load carriers tipping over. Both the castors and the running gear also need to stay on track so that the goods carriers don’t veer off course. Tuggers are frequently used to transport heavy loads at relatively high speeds.

Blickle’s high-quality polyurethane elastomers meet all of these requirements. Blickle Besthane Soft, the tread used for the ALBS wheel series, is perfectly suited for use with tuggers due to its high dynamic load capacity and its extremely low rolling resistance. A spring-loaded bracket ensures that the castors stay in constant contact with the floor. Two of the four castors attached to the running gear of the load carrier will be fixed in place when the unit is towed. This can be done using two fixed castors or two swivel castors which can be locked in a specific direction.
Forklift trucks
Many companies use forklift trucks to transport goods internally. Most forklift trucks use lifting frames so that pallets or containers like cage pallets can be stacked up easily. Specialised versions of forklift trucks like reach trucks, turret trucks and side loaders need to meet other requirements.

The running gear of industrial trucks and forklift trucks are subject to a wide range of specific requirements due to their variety of application conditions. These include the dimensions of fittings and the installation space, suspension and vibration absorption properties for specific vehicles and a high dynamic load capacity for the wheels.

Blickle develops solutions which are tailored to specific applications on the basis of its extensive expertise derived from working together with a wide range of renowned manufacturers of industrial trucks. Solutions like spring-loaded swivel castors with polyurethane springs, height-adjustable stabilisation castors, stabilisation castors with hydraulic springs or stabilisation springs with adjustable spring tension play an essential role in optimising the contact pressure of the drive wheel on the surface. The high-quality treads Blickle Extrathane and Blickle Besthane as well as the high quality polyurethane-elastomer Vulkollan provide an impressively high level of dynamic load capacity and resistance to tear propagation and cuts, in addition to being non-marking.
Automated guided vehicles
Automated guided vehicles (AGVs) are a means of transport which follow marked routes. They are used for the automated and driverless transport of material as part of intralogistics processes. Automated Guided Vehicles are frequently combined with a central control system to form complete Driverless Transport Systems (DTS). They are used to transport both small and large carriers and facilitate automated logistics processes with a high level of efficiency and safety. These processes frequently run 24/7.

Driverless transport systems place significant demands on wheels and castors in very small installation areas. For example, the load capacity of a single automated guided vehicle can range from a few kilograms to several tons. Castors for automated guided vehicles have a much higher level of operational performance compared to standard castors as they are frequently in permanent use. Because of these application conditions, driverless transport systems frequently require wheel tread designs that are specifically optimised for DTS applications and wheel bearings that are designed for continuous operation.

Blickle Besthane® and Vulkollan® tread materials are particularly suitable for use in AGVs. These provide the lowest possible level of rolling resistance and are available as running wheels in the GB and GVU series as standard. They are also available as drive wheels in the GBN, GVUN and VSVU series. Bracket solutions designed specifically for DTS applications guarantee a long service life and maintenance-free operation. From ultra-compact swivel castors through to wheels with special bearings and special tread geometries and heavy duty solutions with electromagnetic braking systems, Blickle has a wide range of special solutions for these applications.
Office Address
Jl. Pangeran Jayakarta 46 Blok A No.7
Jakarta - 10730, INDONESIA
Copyright © 2022 - Buana Mas Prestasi All Rights Reserved,
Website by IKT