a a a a a a a a a
Wheel and castor series with injection-moulded polyurethane tread | Buana Mas Prestasi
Logo Header  Footer
Logo Header  Footer
Authorized Distributor of BLICKLE In Indonesia
Wheel and castor series with injection-moulded polyurethane tread

Wheel and castor series with injection-moulded polyurethane tread

Good floor preservation and non-staining
Thermoplastic injection-moulded polyurethane (TPU) based on polyesterpolyol, diisocyanate and glycol. This is vibration-absorbing, non-marking, non-staining and highly abrasion-resistant, while also providing good floor preservation. The tread is also resistant to a wide range of aggressive substances, although it has only limited resistance to hot water or steam. For a detailed overview, please refer to the Blickle guide. The TPU tread is combined with nylon wheel centres, which have a variety of characteristics. TPU treads are used for a variety of applications, depending on the required load capacity. The tread is typically used for applications which involve loads that remain stationary for long periods but must still be easily movable. It is also frequently used by manufacturers of stainless steel containers or stainless steel carriages.
PATH Wheel and castor seriesVIEW PRODUCT
POTH Wheel and castor seriesVIEW PRODUCT
Office Address
Jl. Pangeran Jayakarta 46 Blok A No.7
Jakarta - 10730, INDONESIA
Copyright © 2022 - Buana Mas Prestasi All Rights Reserved,
Website by IKT